Introduction
The WCM-8600 wireless language distribution system is designed to offer language distribution in 4/6/8/10/12 channels for simultaneous interpretation using the advanced infrared light transmission technology.
Main Control
1. The IR transmitter offers high security and prevents external interference.
2. It has an automatic level control function (ALC).
3. The IR signals will not be disturbed by daylight.
4. It delivers an elegant configuration in accordance with ergonomics.
5. It has input channel direct function.
6. It has 12CH audio output for recording.
IR Transmitter
1. The IR radiator can radiates and distribute up to 12 channels of audio signal.
2. It offers auto switched on/off by carrier signals from transmitter unit.
3. It has auto gain control to ensure diodes with max.efficiency.
4. It is convection cooled for noiseless, reliable operation.
5. It can be mounted on the ceiling, wall, floor stand or optional tripod.
6. It can be easily daisy-chained together to expand coverage.
7. The half radiator angle is +-22 degrees
Interpreter Console
1. The interpreter unit offers up to 12CH simultaneous interpretation.
2. The IR Transmitter unit can connect 11 interpreter’s units.
3. It offers voice adjustment and prevents feedback.
4. It ensures tat every channel is correspondent to the RELAY function respectively.
5. If delegates speak too fast, it can give a request for slower speed.
6. It will not pick up interpreter’s cough if a special key is pressed down.
7. The LCD can display input and output channel.
8. It has interpreter support 13P and 25P connection.
9. The LCD can display current channel language.
IR Receiver
1. It is a pocket size wireless handheld unit.
2. IR receiver accommodates up to 12 different languages.
3. It has a channel selector and headphone connector.
4. It offers power on/off switch and volume level control.
5. It is powered by rechargeable batteries.
6. It is powered by rechargeable batteries.
7. Volume, channel, signal and battery power level display on LCD.
Charging Case
1. It is used for charging IR receivers.
2. It offers high efficiency switch mode.
3. The input voltage is AC110V/240V/50Hz-60Hz.
4. It charges 24pcs of IR receivers per charging.
5. The dimensions are 45.5*32*34cm.
